The network layer is layer 3 in the OSI model, and it is responsible for connections between different networks.
After reading this article you will be able to:
Copy article link
Network-to-network connections are what make the Internet possible. The "network layer" is the part of the Internet communications process where these connections occur, by sending packets of data back and forth between different networks. In the 7-layer OSI model (see below), the network layer is layer 3. The Internet Protocol (IP) is one of the main protocols used at this layer, along with several other protocols for routing, testing, and encryption.
Suppose Bob and Alice are connected to the same local area network (LAN), and Bob wants to send Alice a message. Because Bob is on the same network as Alice, he could send it directly to her computer across the network. However, if Alice is instead on a different LAN several miles away, Bob's message will have to be addressed and sent to Alice's network before it can reach her computer, which is a network layer process.
A network is a group of two or more connected computing devices. Usually all devices in the network are connected to a central hub — for instance, a router. A network can also include subnetworks, or smaller subdivisions of the network. Subnetworking is how very large networks, such as those provided by ISPs, are able to manage thousands of IP addresses and connected devices.
Think of the Internet as a network of networks: computers are connected to each other within networks, and these networks connect to other networks. This enables these computers to connect with other computers both near and far.
Anything that has to do with inter-network connections takes place at the network layer. This includes setting up the routes for data packets to take, checking to see if a server in another network is up and running, and addressing and receiving IP packets from other networks. This last process is perhaps the most important, as the vast majority of Internet traffic is sent over IP.
All data sent over the Internet is broken down into smaller chunks called "packets." When Bob sends Alice a message, for instance, his message is broken down into smaller pieces and then reassembled on Alice's computer. A packet has two parts: the header, which contains information about the packet itself, and the body, which is the actual data being sent.
At the network layer, networking software attaches a header to each packet when the packet is sent out over the Internet, and on the other end, networking software can use the header to understand how to handle the packet.
A header contains information about the content, source, and destination of each packet (somewhat like stamping an envelope with a destination and return address). For example, an IP header contains the destination IP address of each packet, the total size of the packet, an indication of whether or not the packet has been fragmented (broken up into still smaller pieces) in transit, and a count of how many networks the packet has traveled through.
The Open Systems Interconnection (OSI) Model is a description of how the Internet works. It breaks down the functions involved in sending data over the Internet into seven layers. Each layer has some function that prepares the data to be sent over wires, cables, and radio waves as a series of bits.
The seven layers of the OSI model are:
It is important to keep in mind that the OSI model is an abstract conceptualization of the processes that make the Internet work, and interpreting and applying the model to the real-world Internet is sometimes a subjective exercise.
The OSI model is useful for helping people talk about networking equipment and protocols, determining which protocols are used by which software and hardware, and showing roughly how the Internet works. But it is not a rigid step-by-step definition of how Internet connections always function.
The TCP/IP model is an alternative model of how the Internet works. It divides the processes involved into four layers instead of seven. Some would argue that the TCP/IP model better reflects the way the Internet functions today, but the OSI model is still widely referenced for understanding the Internet, and both models have their strengths and weaknesses.
In the TCP/IP model, the four layers are:
But where are OSI layers 5 and 6 in the TCP/IP model? Some sources hold that the processes at OSI layers 5 and 6 either are no longer necessary in the modern Internet, or actually belong to layers 7 and 4 (represented by layers 4 and 3 in the TCP/IP model).
For instance, since the TCP protocol opens and maintains sessions at OSI layer 4, one could consider OSI layer 5 (the "session" layer) to be unnecessary — and it is not represented in the TCP/IP model. Additionally, HTTPS encryption and decryption can be considered an application layer (OSI layer 7 or TCP/IP layer 4) process instead of a presentation layer (OSI layer 6) process.
In the TCP/IP model, there is no "network" layer. The OSI model network layer roughly corresponds to the TCP/IP model Internet layer. In the OSI model the network layer is layer 3; in the TCP/IP model the Internet layer is layer 2.
In other words, the network layer and the Internet layer are basically the same thing, but they come from different models of how the Internet works.
A protocol is an agreed-upon way of formatting data so that two or more devices are able to communicate with and understand each other. A number of different protocols make connections, testing, routing, and encryption possible at the network layer, including:
Because they are exposed to the rest of the Internet, network layer infrastructure is vulnerable to external attacks, especially distributed denial-of-service (DDoS) attacks. Routers, switches, and other network interfaces can all be overwhelmed or compromised by malicious network traffic, and almost any of the above network protocols can be used in an attack.
Cloudflare Magic Transit protects networking infrastructure using the same technology that keeps millions of web properties up and running in the face of vulnerability exploits and DDoS attacks. It extends the protection of Cloudflare to on-premise and data center networks, keeping organizations secure from network layer attacks.
Learning Center Navigation